In the same category
€20.67
Knife No. 8, from the TRADITION collection made in France by OPINEL.
Its Yatagan blade is made of stainless steel and its handle is made of natural and varnished beech wood.
It is sold with a sublime casethat can be worn on the belt.
€104.17
Meat and poultry boning knife, Les Forgés 1890, made in France by Opinel, renowned cutler.
13cm stainless steel blade.
€75.83
The knife set forged and manufactured in France by Sabatier.
It comes from the Edonist Rubis range, and is made up of 2 pieces
€68.33
EBENE knife No. 8, from the TRADITION LUXE collection made in France by OPINEL.
Its blade is made of stainless steel and its handle is made from ebony wood.
€14.17
Oyster and shellfish knife, made in France by Opinel.
Blade with a length of 6.5cm, made of stainless steel.
-20%
€110.42
€88.33
Edonist forged carving set by Lion Sabatier
Made in France.
Composed of 2 pieces : a carving knife and fork
For conditions of delivery, please see below
- -20%
€104.17
Tapered knife, from the Les Forgés 1890 collection, made in France by Opinel.
18cm stainless steel blade.
The Galbéos knife set from Au Nain is made up of 7 pieces.
It is made by and for kitchen professionals.
All of this set and its components are made in France.
Made of stainless steel.
€39.88
Paring knife, from the FK2 range, manufactured in France by Debuyer.
Its blade, made of stainless steel, is 9cm long
€12.00
Box of 2 paring knives n°112, from the LES ESSENTIELS collection, made in France by OPINEL.
Their blades are made of stainless steel and their handle is made of hornbeam wood.
€8.25
Vegetable knife n°114, from the collection LES ESSENTIELS, manufactured by OPINEL.
Its blade is made of stainless steel and its handle is made of hornbeam wood.
5 colors are available.
-10%
€56.25
€50.63
Roger ORFEVRE manufactures in France the CUT BOX knife holder The tree display with 3 knives.
In wood and stainless steel, its dimensions are 17.3x7.8x22cm
- -10%
€19.92
PADOUK knife n°6 or n°8, from the TRADITION LUXE collection made in France by OPINEL.
Its blade is made of stainless steel and its handle is made from Padouk.
2 sizes are available.
OPINEL Knife No. 9 Tradition Multifunction DIY - 2 colors
Availability:
€20.42
Reference : 1792
Delivery time : around 8-10 days
Knife No. 9 Tradition Outdoor DIY, made in France by Opinel.
Its blade is made of stainless steel and its handle is made of polyamide.
It is ideal for DIY enthusiasts, a flathead screwdriver and a crosshead screwdriver are integrated.
It is available in 2 colors.
Knife No. 9 Tradition Multifunction DIY, made in France by Opinel.
A folding/closing knifedesigned for DIY enthusiasts... but not only. Very practical and essential, it can be kept in the office, in the car, in a tool kit. It is also very practical to have for small electrical jobs.
Folding, this closing knifehas aVIROBLOC safety ring. This system allows a locking of the blade in the open position for safety during use and apossible locking in the closed position, to secure transport.
- Its blade, with a length of 8cm is efficient and robust. It is made of martensitic stainless steel.
The hardness of the blade is 55-57 HRC which gives it a very good cutting edge and high resistance to abrasion. It cuts without tearing.
The blade is also equipped with a wire cutter (maximum 5mm diameter) and a wire stripper (maximum 8mm diameter).
- Thehandleis injected with glass fibre-reinforced polyamide forvery good resistance to wear, shocks, water and extreme temperatures (-40°C to +80°C). The grip is ergonomic and secure.
- 2 screwdriver bits are included in the handle. They snap magnetically into the heel.
You have a flathead screwdriver (4mm screw) and a crosshead screwdriver (3.5 to 5mm screw) as well as a magnetic bit holder at the end of the handle.
2 colors are available:
- gray
- yellow
Hand washing is recommended for this knife. No special maintenance is required.
Vous avez une question sur ce produit ?
Nous sommes à votre écoute
Aucune question n'a été posée pour le moment
Catégories associéees
Knife No. 9 Tradition Outdoor DIY, made in France by Opinel.
Its blade is made of stainless steel and its handle is made of polyamide.
It is ideal for DIY enthusiasts, a flathead screwdriver and a crosshead screwdriver are integrated.
It is available in 2 colors.