+33(0)249881384
Contact us
The Boon's luminous armchair is made in France by Link.
3 in 1, it allows you several uses!
Its white color can be modified thanks to the lighting system inside the armchair.
AA armchair in Butterfly Canvas cover made in France by AIRBORNE.
Its "LIN IN & OUT" cover is made of linen, suitable for both indoor and outdoor use.
2 colors are available: craft or safari.
The structure is made of black epoxy powder-coated steel.
The AA Butterfly Batyline EDEN armchairs are made in France by AIRBORNE.
14 colours of removable covers are available
2 removable structures are also available: in stainless steel or in black epoxy powder-coated steel
The AA Butterfly Batyline ELIOS armchair are made in France.
Cover/canvas with black epoxy powder-coated steel structure.
7 colors are available.
AA BUTTERFLY armchair with a cotton matted cover made in France by Airborne.
12 cover colors are available.
2 structures are available.
Canvas - BATYLINE EDEN cover for AA Butterfly AIRBORNE armchair.
Synthetic fibre cover, made in France by Airborne.
14 colours are available
Please note that the structure is not sold with thecover. This is only the cover that is sold here.
BATYLINE fabric from the ELIO collectionS for AA Butterfly armchair.
Cover made in France by Airborne, in 100% synthetic fibers for outdoor use.
7 colors are available.
Please note that the structure is not sold with thecover. This is only the cover that is sold here.
Canvas/Cover for AA Butterfly armchair made in France by AIRBORNE.
cover in cotton matted.
12 colors are available.
Please note, the structure is not sold with thecover. This is only the cover that is sold.
Frame for AA Butterfly armchair. Made by Airborne, in France.
The frame is available in black or white epoxy powder-coated steel or in silver marine stainless steel.
Please note, only the frame is sold here. The cover/canvas can be found on our site.
Metal bar stool with 80cm seat height VALENCE manufactured by CARRIER
This stool with backrest is available in indoor or outdoor versions (with treatment)
Made in France
VALENCE low stool made in France by Carrier.
The stool is customizable : 32 structure colors (epoxy) are available, in two versions: indoor or outdoor.
VALENCE stool made in France by Carrier.
The stool is customizable : 32 structure colors (epoxy) are available, in two versions: indoor or outdoor.
Two heights : 65cm (snack) or 80cm (bar).
VIRGULE low stool made in France by Carrier.
The stool is customizable : 32 structure colors (epoxy) are available, in two versions : indoor or outdoor.
VIRGULE stool made in France by Carrier.
The stool is customizable : 32 structure colors (epoxy) are available, in two versions: indoor or outdoor.
Two heights : 65cm (snack) or 80cm (bar).
ALU CHAM AIRCOMFORT folding camping or beach chair, made in France by LAFUMA MOBILIER.
Aircomfort collection, with aluminium tube.
2 fabric colours are available: taupe or steel.
ALU CHAM folding camping or beach chair, made in France by LAFUMA MOBILIER.
Natura collection, Batyline ISO, with aluminum tube.
4 colors of fabrics are available: SKY blue, MOSS green, RYE beige, OCEAN blue.
ALU CHAM AIRCOMFORT XL folding camping or beach chair, made in France by LAFUMA MOBILIER.
Aircomfort collection, with aluminium tube.
2 fabric colours are available: taupe or steel.
The Boon's luminous armchair is made in France by Link.
3 in 1, it allows you several uses!
Its white color can be modified thanks to the lighting system inside the armchair.
Reference : 107123L
The illuminated BOON'S armchair is made in France, in Avignon, by LINK.
Particularly innovative, its playful design, with simple lines, has an innovative concept: 3 in 1!
Indeed, 2 possibilities:
- a free-standing armchair
- an armchair without legs, with a coffee table.
The bottom part of the armchair can be removed to make a small coffee table, ingenious!
The armchair, without its lower part, floats and can thus go into the water to accompany you during your moments of relaxation in your pool< /strong>. In fact, this chair has the IP68 standard to guarantee perfect waterproofing.
The armchair is white.
However, this one has lighting inside:
thislighting can be in different colors to allow you to create the perfect atmosphere, according to your desires.
A remote control is provided so that you can change the color of the light (pink, orange, blue, white, green, etc.), its intensity, or turn the light into a candle effect.
The charging base is also included. It will allow you to recharge the chair, for a light autonomy of 20 hours.
TWO POSSIBILITIES ARE OFFERED TO YOU FOR LIGHTING:
- Lighting in the seat - Pro Lite 1 lighting module:
The lighting will only be in the seat/back area. There will be no light in the base part (which can also be used as a small coffee table).
- Lighting in the seat and in the base - Pro Lite 2 lighting modules:
The lighting will be both in the seat/back part, but also in the lower part, the base of the armchair, which can become a small coffee table, to make it a fully illuminated armchair.
MATERIALS:
Made from high quality translucent opal polyethylene, this armchair is designed to withstand the harshest outdoor conditions.
RESISTANCE:
It is UV resistant, which means it will not fade under intense sunlight. Additionally, it is alsoweatherproof, allowing you to leave it outside without fear of damage from rain or other weather conditions.
DIMENSIONS:
- total height: 75cm
- length: 79.6cm
- seat height 51.3cm
- table height: 23.7cm
This armchair is very easy to maintain and clean with a cloth and lukewarm water.
Delivery time: about 8-15 days</span
Based in Avignon since 1997, Link started its activity in the swimming pool sector in through the representation of North American factories for the marketing of their equipment throughout Europe. From 2010, Link has developed its own products mainly focused on Outdoor in order to complete its offering on the swimming pool market. Logistics experience also being part of its history, the company designs and develops all products with an objective of immediate proximity. This is how 90% of the tools used to manufacture the products are installed in France and if possible as close as possible to the assembly and storage site in Avignon. The omnipresent eco-design in the development of the products thus leads to recyclability optimal through single material objects and therefore durable. The more technical components (electronic cards, LEDs, etc.) are subject to strict selection based on quality, durability and reparability because as a reminder, all products are waterproof or resistant to water and salt. , with chlorine. The packaging of each product is systematically recyclable or recycled and is exclusively made in France.
Vous avez une question sur ce produit ?
Nous sommes à votre écoute
Aucune question n'a été posée pour le moment
