The ANEMONE chair is made in France by the workshops of the company CARRIER, in Lot-et-Garonne.
Its design is by Vincent Carrier.
Timeless, trendy, comfortable and minimalist, while retaining a touch of originality, this high-quality chair is durable and will bring a modern touch to your interior. It will easily fit into various decoration styles: from the most vintage to the most contemporary and minimalist.
It is ideal around a dining table.
Customisable, you can choose the colour of the chair's frame, as well as the type and colour of its fabric. You will find all the necessary information at the bottom of this description.
Composition:
Its frame is made of steel, coated with an epoxy paint.
Its MDF seat is very comfortable, with a seat density of 30kg/m², in RP polyether foam30048.
The dimensions of the ANEMONE chair are as follows :
- height with backrest: 80cm
- seat height: 45cm
- width: 43cm
- depth: 44cm
- product weight: 5.4 kilos
- recommended supported weight: 100 kilos
The chair is delivered assembled.
CUSTOMISATION:
The ANEMONE chair is customisable: 32 colours (epoxy) are available for its frame and 52 fabrics are available for the seat. You will find the colour charts below.
You will find many colours such as: yellow, orange, red, blue, white, grey, beige, brown, black, dark grey, pink, gold, copper... in various shades and tones.
Choice of colours and fabrics:
You can, in the small dropdown menu choose the colour of your chair's frame + its fabric range (e.g. Colour - P47 - Sunflower, Finish - Club Fabric)
To choose the exact colour of the fabric you want, refer to the colour chart (below) of the chosen fabric range (Club, Paris or Berry) and note the fabric reference you want in the comments section (a white box) just before the payment step.
Compositions and characteristics of the different fabrics:
Club range fabrics:
- 650g/m²
- >300.000 Martindale test cycles
- UV resistance: ISO 105 B02 ≥ 7/8
- Cold resistant down to –23°C
- Protections: antifungal, antibacterial, antifungal protection
- Stain-resistant finish
- Support and surface resistant to mould
- Resistant to sulphide stains
- Antistatic finish
Berry range fabrics:
- Composition: 100% Harmolan PP: a recyclable and durable fibre
- Weight: 448 g/m²
- Abrasion Martindale : 45 000 T
Paris range fabrics:
- Composition: 90% PES / 5% NYL / 5% RY
- Weight: 360 gr./m2 / 504 gr./ml
- Martindale abrasion: Cycles >50.000 – ISO 12947-2:2016
COLOUR CHARTS:
Below you will find the colour chart for the paint used on the metal frame:
.png)
And here, the colour charts for the various fabric ranges:
.png)
.png)
.png)
For more advice and information, or for other customisation options, we invite you to contact our customer service.
This chair comes with a 2 year warranty.